With the newly improved Tronix SpeedFire, you have unlimited number of pops and faster recycling time for your flash guns.
WHAT IS A TRONIX SPEEDFIRE?
It is an external power supply, which converts AC power to high voltage DC power that connects to the flash gun’s
external power port. It effectively reduces recycling time and provides unlimited number of flashes.
WHY USE TRONIX SPEEDFIRE?
Tronix SpeedFire enables you to get away from battery depletion You will no longer need tons of AAs or rechargeable battery sets if you are going to work for long hours in your home/studio.
►powers flash guns or small flashes directly from AC or wall socket,
recycles in less than 1 second!
►plug and play feature, autovolt (100-240Vac)
►makes battery life longer due to reduced strain
►compatible with most Canon and Nikon flash guns
(external camera flash with external power connections)
►best recommended for home/studio or semi-permanent set up
FLASH GUN COMPATIBILITY LIST
Tronix SpeedFire for Canon Flash Guns
- Canon 580EX2 / 580EX / 550EX / 540EX / 430EZ
- Canon MR-14EX / MT-24EX
Tronix SpeedFire for Nikon Flash Guns
- Nikon SB900 / SB800 / SB80DX / SB28DX
- Nikon SB28 / SB27 / SB26 / SB25 / SB24 / SB20 / SB11 / SB22
► The cable of the Tronix SpeedFire serves as the power switch for the output.
► The Tronix SpeedFire provides power to the flash only. Other functions of the flash such as the LCD display and controls are powered by the internal batteries of the flash.
►The Tronix SpeedFire allows the flash to fire full power flashes faster than normal and this may cause the flash's temperature to rise rapidly.
►Allow the flash to cool down for at least 10 minutes rest after firing 40 continuous full power flashes to avoid any damage to the flash.
►It is recommended to replace the internal batteries of the flash when the recycling time exceeds three (3) seconds.